Grain is food. That makes plastics in the grain storage system part of the food supply chain, not only part of the storage infrastructure. The principle is set out plainly in the Australia New Zealand Food Standards Code: only packaging material that is fit for its intended use and is not likely to cause food contamination must be used (Food Standards Australia New Zealand (FSANZ), Standard 3.2.2). A separate standard, Standard 1.4.1, sets maximum levels for some contaminants that can enter food through contact with packaging material.

The food safety risks from grain bunker and grain bag plastics fall into two groups: physical contamination, where pieces of the material end up in the grain, and chemical contamination, where substances in the material migrate into it.

Physical Contamination

Physical contamination is the more familiar risk in grain storage. Before woven and coated ground sheets were adopted, fragments of cheap polyethylene film regularly found their way into grain during out-loading. Coated fabrics carry a related risk known as pilling, the formation and de-lamination of small balls of coating caused by front-end loader buckets pushing grain back and forth across the sheet. Both were covered in last month’s issue.

The defences are material quality and site practice. Good quality ground sheeting reduces pilling through strong coating adhesion and a well-formulated coating.

Chemical Contamination

Plastics are not pure polymer. Grain storage fabrics and films also contain ultraviolet stabilisers, pigments, coatings, fillers and processing aids. Food-contact rules control which of these substances may be used and how much of them may migrate into food. FSANZ has reviewed chemical migration of these substances and concluded that estimated dietary exposure is low and not of concern for human health (FSANZ, October 2017), which is why the emphasis falls on using materials made and documented for the purpose.

Australia’s own standard (AS 2070-1999 Plastics Materials for Food Contact Use) guides industry on the polymers, additives, colourants, inks and coatings suitable for food contact. The most widely used benchmark is European Regulation (EU) No 10/2011, the EU’s specific regulation for plastic food-contact materials. It lists the substances permitted in their manufacture, sets limits on how much of any listed substance may migrate into food, and caps total migration at 10 milligrams per square decimetre of contact surface. A second European regulation, REACH (EC No 1907/2006), takes a broader view: rather than food contact, it governs the chemicals used in the material itself. Under REACH, suppliers must tell customers if a product contains more than 0.1 per cent by weight of any substance on Europe’s list of ‘Substances of Very High Concern’. Together, the two give growers a practical test: a food-contact compliant material that is also REACH compliant is safe in contact with grain and free of the most hazardous chemicals.

Practical Steps for Grain Handlers

  • Ask for documentation – a declaration of compliance against a recognised food-contact standard, such as European Regulation (EU) No 10/2011.
  • Ask also for a ‘REACH’ statement confirming whether the material contains any ‘Substance of Very High Concern’ (such as PFAS, BPA & phthalates), above 0.1 per cent by weight. Reputable suppliers should be able to provide one without hesitation. A supplier who cannot is a reason to look elsewhere.
  • Use materials made for grain. The Grains Research and Development Corporation (GRDC) warns that bags designed for silage look similar to grain bags and can be confused, with serious consequences (GRDC, July 2014). The same principle applies to grain cover fabrics.
  • Keep grain covers & ground sheets for grain. A grain cover or ground sheet that has been used over fertiliser or chemicals should not return to grain service. The GRDC notes that dual-purpose storage requires impeccable hygiene practices to avoid contamination (GRDC, June 2020).
  • Clean and inspect reused sheets. Retired top covers are commonly repurposed as ground sheets (Kondinin Group, August 2024), which is sound practice provided the sheet is clean, intact and has only ever been in grain service.

Bunker plastics are usually specified on strength, ultraviolet life and price. For the months grain sits against them, they must also meet a simpler requirement – nothing from the material should end up in the grain.

More from Jaylon: Grain Storage Solutions · our agriculture range. Questions this season? Get in touch.